EDM WIRE QUALITY ANALYSIS

Thanks to our experience in the production of ultra-fine EDM wire, we have advanced knowledge of what problems the wires will face. Our products are produced in a way that is free of contamination by considering the characteristics of the workpieces to be processed, and its accuracy is controlled by our superior analysis capabilities.In cooperation with our customers, we provide optimum coating and core wire products that meet cost and quality requirements. Thanks to our well-equipped laboratory, we offer quality products to minimize breakage during processing.

QUALITY ANALYSIS

Our test work on problems is carried out as follows. For detailed information, you can contact our technical team.

  • Contact Us
  • Theoretical work
  • Corrosion study with SEM and EDS analysis
  • Stress tests
  • Spray chamber operation to verify theoretical considerations

CORROSION AND FAULT ANALYSIS

We offer a complete service by using the latest technical equipment to perform microscopic and analytical work on all kinds of surfaces. We use SEM, AAS and EDS techniques to solve corrosion and product failure problems.

Topography :
Surface irregularities, surface roughness, surface appearance, such as surface surveys are made.
Chemistry :
Corrosion thickening composition and alloy composition investigations are carried out.
Defection :
There are researched to defects such as cracks, pores in the coating, coating defects, dirt, poor adhesion of the coating.
Corrosion :
Corrosion type, corrosion products, and corrosion level are determined.
Cleaning :
Surface cleaning is examined

ANALYSIS PROCESS

Corrosion error analysis is performed with SEM, and the problem behind the error is evaluated. Our error analysis processes are as follows:

  • Macroscopic investigations
  • Microscopic investigations
  • Cross section analysis
  • SEM analysis
  • Chemistry analysis with EDS
  • Documentation and reporting

MATERIAL ANALYSIS SKILLS

We have a laboratory equipped to analyze and develop materials. Various chemical, physical and thermal reports are revealed in the laboratory.

ATOMIC ABSORPTION SPECTROSCOPY (AAS)

We have a laboratory equipped to analyze and develop materials. Various chemical, physical and thermal reports are revealed in the laboratory.

SCANNING ELECTRON MICROSCOPY (SEM) AND ENERGY DISTRIBUTED SPECTROSCOPY (EDS)

SEM analysis can give information topography, morphology, orientation and phases of grains, chemistry, surface defects.

TENSILE TEST

The tensile test is used to test the tensile strength of core/final material and adhesion of applied coatings.

OVALITY MEASUREMENTS

The ovality must be checked to ensure that wires are cut correctly. We measure at precise tolerances.

LIGHT OPTICAL MICROSCOPE (LOM)

We have a light optical microscope with the precision required for metallographic work.

DOCUMENTATION SKILL

For an accurate evaluation of analyzes, we accurately record all data and improve wires with our data.

Please contact us for more information
about EDM Cutting Wire

Our technical team will help you make the most of it.

TOP